Go to navigation links
birch plywoodpoplar plywoodoak plywoodash plywoodmaple plywood
High-quality commercial & technical plywoods
Plywood
Birch Plywood
Thickness = 0.4mm-100mm
Stock panel sizes = 1270x1270mm up to 1525x3050mm
Maximum size 5100mm long and 2100mm wide
(2900x13000mm if scarf jointed)
Can be supplied with glue suitable for laser cutting
Available rated EN 636-3 - suitable for fully exterior applications
Fire retardant options available
These plywoods are available in a wide range of thicknesses and sizes. All plywood types can be supplied with any combination of the following additional services…
Standard material as produced at the plywood mill
Faced with over 350 real wood veneers to
High pressure laminates bonded to both sides
Precoated with clear lacquer, oil or wax
Painted/lacquered or special bespoke finishes
Cut to size
Edges profiled to your specific requirements
Machined to your bespoke design or pattern
Plywood Types
Winwood Products is a plywood supplier offering the following configurations/options:
Commercial Plywoods
Birch plywood
Birch Plywood
0.4mm-50mm thick (composites up to 100mm)
Stock thickness:
0.4mm, 0.8mm, 1.5mm, 4mm-50mm
Stock sizes:
2440x1220mm, 1220x3050mm, 1525x1525mm, 1525x3050mm, 2400x1200mm, 1200x1200mm, 1200x2400mm, 1550x1550mm
Special sizes up to 1880x4000mm (standard)
Birch plywood is a well-known, good quality utility plywood panel that has a very good strength to weight ratio, and is relied upon to be stable under various ambient moisture conditions.
This product is used in various industrial & engineering applications, and used extensively for furniture manufacture & shopfitting.
Birch plywood can also be faced with decorative veneers and high-pressure laminates.
Lightweight poplar plywood
Lightweight poplar plywood
3mm-60mm thick (composites up to 100mm)
Light in weight (typical 380-420kg/m3)
Stock thickness: 3mm-25mm
Stock panel sizes: 2440x1220mm, 2500x1220mm, 3050x1220mm
Special sizes up to 5200mm long and 2130mm wide
Available with glueline suitable for laser cutting, and CARB/NAF (no added urea-formaldehyde)
Extremely light in weight and yet very strong, poplar plywood is used where weight and/or reliable quality of face and core are of concern.
Various face options are available, and it is also available faced with decorative veneers and high-pressure laminates.
Flexible plywood
Flexible plywood
3mm-16mm thick
Light in weight (average 450kg/m3)
Stock thickness: 5mm-16mm
Stock size: 3120x1850mm / 1850x3120mm, 2500x1220mm / 1220x2500mm
5mm can be bent to 50mm radius under certain conditions
This range of plywoods has been specially engineered to offer a high degree of flexibility.
These panels are used to form curves and more organic shapes than can be achieved using standard plywood, which by its design, has been produced to be as rigid as possible.
Specialist Technical Plywoods
Ash-throughout plywood
Ash Plywood
4mm-40mm thick (composites up to 100mm)
Stock thickness: 4mm-18mm
Stocked size 2550x1250mm
Stocked in closed core = no open defects anywhere in the panel
To special order up to:
2550x1830mm (ash throughout) or
3660x1220mm & 2500x2070mm (ash faced)
Ash plywood is a high-quality technical plywood panel that is used in various industrial & engineering applications, the manufacture of decorative furniture and shopfitting.
Ash-throughout plywood is used in engineering & sports equipment where the technical characteristics and excellent dimensional stability of ash in varying ambient moisture levels is beneficial.
Beech-throughout Plywood
Beech Plywood: Beech veneer
Stocked with unjointed, single-piece faces (grade II+)
No patches on either face
4mm-100mm thick
Stock thickness: 4mm-45mm
Stock size: 2500/2550x1250mm
Stocked in closed core = no open defects anywhere in the panel
To special order up to:
2550x1830mm (beech throughout) or
3660x1220mm & 2500x2070mm (beech faced)
This extremely hard-wearing plywood (twice as hard as birch) is supplied with rotary cut or sliced cut beech face veneers that have been bonded to a beech plywood core.
This product is also available as the main structure of sound reduction plywood and flame retardant plywood.
Fineline striped plywood
Fineline plywood
4mm-150mm thick (thicker by arrangement)
Unidirectional ash, beech & oak stocked in size 2300x350mm
Ash, beech, birch, maple & oak produced in small quantity up to size 2400x400mm
Max size 3050x400mm (wider by bonding multiple sections together)
Multiple woods can be mixed within one panel
The stripey appearance of this highly decorative plywood block of wood is used as a feature in interior finishes and in the manufacture of decorative furniture, stairs & floors.
This decorative striped plywood is manufactured using a combination of strips of woods that are bonded together to form a decorative panel product called Fineline.
Maple-throughout plywood
Maple throughout plywood
Thickness from 3mm up to 100mm
Standard sizes of 1250/2200x1250mm & 2200x1530/1850mm
Special plywood sizes available up to a maximum of 2200x1850mm
Glue types of EN 636-2 E1 (covered exteriors) & EN 636-3 (fully exterior)
This plywood product is manufactured from 100% rotary peeled maple veneers.
The product is typically manufactured iusing maple veneers 1.66mm thick in closed core construction (without open defects).
Oak-throughout plywood
Oak throughout plywood
Thickness from 3mm up to 100mm
Standard sizes of 1250/2200/2550x1250mm & 2550x1530/1850mm
Special plywood sizes available up to a maximum of 2550x1850mm
Glue types of EN 636-2 E1 (covered exteriors) & EN 636-3 (fully exterior)
This is a very strong solid oak plywood product that has been manufactured from rotary peeled oak veneers that are closed (without open defects).
It is generally supplied using veneers of oak throughout its construction, although oak combi and oak-faced plywoods are also available for reasons of lower cost or lighter weight, etc.
Okoume lightweight marine plywood
Okoume lightweight marine plywood
3mm-40mm thick (composites up to 100mm)
Light in weight (average 450kg/m3)
Stock thickness: 4mm-25mm
Stock size: 2500x1220mm
Special sizes up to 3100x1830mm
Suitable for extreme moisture conditions
BS 1088 marine performance supported by Lloyd's of London approval
Okoume plywood is often known in the UK as gaboon plywood and is a lightweight, high-quality panel that is typically supplied with exterior gluing in the form of okoume lightweight marine grade plywood.
OKoume ightweight marine plywood can be faced with decorative veneers and high-pressure laminates.
Impregnated / Composite Plywoods
Flame-retardant plywood
Flame-Resistant Plywood
Standard thickness of, 12mm, 13mm, 15mm, 18mm, 27.5mm - others by arrangement
Standard size of 2440x1250mm, 2500x1220mm, 2500x1530mm
Special plywood sizes available up to a maximum of 1900x4000mm
Glue type of EN 636-2 E1 (covered exteriors)
This plywood product offers protection from fire hazards, as it delays the speed at which a fire spreads.
In its pre-impregnated form, it is generally based on beech plywood or birch plywood, although we also offer surface coatings that upgrade non-rated materials to EN 13501-1 Class B.
Sound-reduction plywood
Sound Reduction Plywood
Standard thickness of, 12mm, 13mm, 15mm, 18mm, 27.5mm - others by arrangement
Standard size of 2440x1250mm, 2500x1220mm, 2500x1530mm
Special plywood sizes available up to a maximum of 1900x4000mm
Glue type of EN 636-2 E1 (covered exteriors)
This plywood product offers greatly reduced sound transmission through walls & floors.
It is generally supplied as a composite based around beech plywood or okoume plywood, and it can be faced with our full range of decorative veneers or high-pressure laminates.
Information
Technical details (typical)
Construction:
Multiple layers of veneer (sometimes mixed with other materials (e.g. sound-reduction plywood), bonded with thermosetting glue. Typically, each layer is laid at right angles to its neighbour(s).
The standard procedure is to quote the grain direction as the first dimension, e.g. a panel of size 1220x2440mm will be assumed to have the face & reverse veneers running across the width of the panel
Standard thickness:
0.4mm to 100mm (actual range dependent upon product type)
Typical sizes:
2440 / 2500 / 2550 x 1200 / 1220 / 1250mm
3000 / 3050 / 3300 / 3600 / 4000 x 1200 / 1220mm
2400 / 2440 / 3000 / 3050 / 3600 / 4000 x 1500 / 1525 / 1880mm
NB: Panels are typically supplied in long-grain orientation, apart from some birch products, which are very often cross-grain oriented by default
Tolerances:
Length/width: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
Thickness: +0.2mm, -0.5mm
(Others by arrangement)
Bonding Quality:
EN 314-2 Class 1 - Interior
EN 314-2 Class 2 - Limited resistance to high moisture
EN 314-2 Class 3 - Fully water resistant
E1 (EN 13986) Low formaldehyde, CARB II, ULEF (Ultra Low Emitting Formaldehyde)
Hazard class:
EN 636-1 - Interior applications
EN 636-2 - Limited high moisture / covered exteriors, e.g. soffits
(NB: By definition the glueline must be minimum EN 314-2 Class 2)
EN 636-3 - Extended high moisture / fully exterior, e.g. fascias
(NB: By definition the glueline must be minimum EN 314-2 Class 3)
FSC® & PEFC Certification
Winwood Products is a supplier of:
FSC® certified plywood
and/or
PEFC certified plywood.
These certification systems allow you to purchase wood-based products safe in the knowledge that they have been sensibly and sustainably managed all along the supply path from when the tree was cut down from the forest, right to the point they arrive with you.
NB: If FSC or PEFC certification is specifically required it is vital that this is made clear at the time of placing your order.
To find out more go to out more go to our FAQS
Similar products
Veneered Panels & Doors
Slip-resistant plywood
Decorative slip-resistant flooring plywood - multiple decorative surface options available
Melamine faced birch plywood
Melamine faced birch plywood
Exterior birch plywood faced on both sides with a heavy duty, smooth white melamine film
Laminated faced plywood, MDF & fire doors
Laminated plywood, MDF & fire doors
Plywoods & MDF faced on one or both faces with a hard-wearing HPL (high-pressure laminate)
Coloured polypropylene faced birch plywood
Coloured polypropylene faced birch plywood
Exterior birch plywood faced with UV-resistant polypropylene film with shallow 'orange peel' texture
Smooth film faced formwork plywood
Smooth film faced formwork plywood
Exterior smooth film faced birch plywood designed for use as concrete formwork - often used in decorative applications
Alibaba.com
https://www.alibaba.com › product-detail › 1525x3050…
100% Birch veneer plywood is unique because of it's all-birch veneer core that's cross-banded and laminated with exterior grade glue, making for a superior …
1525X3050mm 1/2 Inch B/Bb Furniture Grade Full Birch Plywood …
Made-in-China.com
https://consmoswood.en.made-in-china.com › product
1525X3050mm 1/2 Inch B/Bb Furniture Grade Full Birch Plywood for Furniture ; After-sales Service: Online Technical Support ; Warranty: 5 Years ; Material: Birch.
1525X3050mm 1250x2500mm FSC Certified CP/CP BB …
Alibaba
https://www.alibaba.com › product-detail › 1525X3050…
Glue:E0,WBP phenolic;Size:1220*2440 mm;Face/back:Birch veneer;Application:Furniture Decoration;layer:13-Ply;Certificates:FSC/CARB P2/CE;Moisture:8%-12% …
Plywood
Winwood Products
http://www.winwood-products.com › timber-products
Thickness = 0.4mm-100mm; Stock panel sizes = 1270x1270mm up to 1525x3050mm; Maximum size 5100mm long and 2100mm wide (2900x13000mm if scarf jointed) …
1525×3050 Plywood Product
Alvi-Bel
https://alvibel.pl › Home › Plywood 1525x3050mm
Our 1525×3050 plywood is the perfect choice for contractors seeking bulk orders and DIY enthusiasts in need of premium-quality plywood.
Large Plywood Sheets-Birch BB/BB EXT 1525x3050 mm
Ply Online
https://www.plyonline.com.au › products › oversize-bal…
This plywood has a very light natural colour. It composes of 1.4mm thick birch plies by cross bonding with either melamine urea glue (interior glue, no visible …
A$320.00 · 30-day returns
Missing: 1525x3050mm | Show results with: 1525x3050mm
EXTERIOR BIG DIMENSION BIRCH PLYWOOD 1525x3050mm
Plymaster Sydney
https://plymaster.com.au › product › short-grain-birch-pl…
Birch Exterior Plywood has an A bond glue line. Sheet Size: 1525x3050mm Thickness:12mm Applications: ceilings, walls, furniture, cladding
China Commercial Plywood Offered by China Manufacturer
Global Sources
https://www.globalsources.com › jiangsu-hongren › com…
China commercial plywood catalog of phenolic wbp glue 1525x1525mm 1525x3050mm birch plywood for furniture to eu grade, commercial plywood 18mm marine …
Marine Plywood
plywoodsupplier.cn
https://www.plywoodsupplier.cn › Products
Marine Grade Plywood 2440x1220mm,1525x3050mm Grade: BB/CC Marine Grade Plywood Finish: Reddish Species Smooth and Clean on Both Sides Substrate: Strong …
GDG PLYWOOD --- Products Catalog
Global Wood
https://www.globalwood.org › product › catalog_details
GDG PLYWOOD · 1) Film Faced Plywood Size:1220X2440mm, 1250X2500mm, 1500X3000mm, 1525X3050mm, 1525X2500mm Thickness: 9-30mm. Core:Poplar, Birch, Hardwood, …
Ocean Wood - 1525x3050mm film faced plywood Welcome…
Facebook
https://www.facebook.com › story
1525x3050mm film faced plywood Welcome enquiry ☝️ #filmfacedplywood #oceanwood #1525x3050.
Certified 1525x3050mm Full Birch Materials Anti Slip Wire …
Alibaba.com
https://vietnamese.alibaba.com › … › Timber › Plywoods
2 days ago — Product name:Anti Slip Wire Mesh Film Faced plywood;Grade:FIRST-CLASS;Thickness Tolerance:0.5MM;Size:1220x2440mm, 1250x2500mm, 1525x1525mm, …
$24.00 · In stock · 5.0 · Review by anonymous · 30-day returns
White Poplar Plywood
Qingdao Fuyuan Timber Co.Ltd
https://www.fuyuantimber.com › productinfo
… plywood,birch plywood,poplar plywood,furniture plywood,packing plywood. Face … 1525x3050mm,1500x3000mm,1530x2440mm,1220x2600/2800/3050/3200/3600/3800 …
What is 1525X3050mm 1/2 Inch B/Bb Ukraine Full Birch …
Made-in-China.com
7 months ago
0:18
What is 1525X3050mm 1/2 Inch B/Bb Ukraine Full Birch Plywood for Furniture, birch11 manufacturers & suppliers on Video Channel of Made-in-China.com.
Waterproof Marine Grade Plywood
plywoodsupplier.cn
https://www.plywoodsupplier.cn › Products
Marine Plywood 2440x1220mm,1525x3050mm Grade: BB/CC Marine Grade Plywood … Marine Grade Plywood 2440x1220mm,1525x3050mm Grade: BB/CC Marine Grade Plywood …
Sanded Birch Interior Plywood 1525 mm x 1525 mm x 17 mm
lesprom.com
https://www.lesprom.com › trade › Sanded_Birch_Inter…
thickness 17 mm, width 1525 mm, length 1525 mm, surface type Outer layers sanded (S2S), emission standard E1, density 650 kg/m 3 , moisture ≤ 12 %, brand …
RUB 1,779.00
ewaiq.com
https://ewaiq.com › exterior-big-dimension-birch-plyw…
EXTERIOR BIG DIMENSION BIRCH PLYWOOD 1525x3050mm. $ 42.13. /Piece. /QTY in piece : 4.65 m². Turkish Plywood. Available. Add to Wishlist. Minimum order quantity …
$42.13
Hot sale 1525x3050mm 11/16mm E0 decorative melamine …
BestSuppliers
https://www.bestsuppliers.com › … › Plywood
Hot sale 1525x3050mm 11/16mm E0 decorative melamine face plywood panels for furniture. Get Latest Price. US$ 12.5. ≥500 Pieces. US$ 11.5. ≥20000 …
$12.50
Buy Hexa Anti-Slip Plywood Wholesale
Plyterra
https://plyterra.com › products › plyterra-antislip-hexa
Wear-resistant anti-slip film faced plywood with hexa pattern · Maximum slip resistance · Improved hiding power and UV resistance · High wear resistance (Taber …
Plywood okoume
vnwoodcorp.com
https://www.vnwoodcorp.com › plywood-okoume-c44
Commercial Plywood; Thickness: 2-40mm; Size: 1220x2440mm,1250x2500mm,1525x3050mm,1830x3660mm and other custmized size. Core: Poplar,
Call 01633 633763
info@winwood-products.com
Products
Services
Uses
Contact
FAQs
HomeProductsPlywood
TermsLegalPrivacySitemap
info@winwood-products.com © 1999-2025 Winwood Products